Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: PH508 Alarm  (Read 4534 times)

cbmac

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
PH508 Alarm
« on: June 21, 2007, 09:01:44 PM »

I have a DS7000 Console and 3 PH508 Horns. When I plug the horn into the same outlet as the Console the horn works fine.
If I plug the horn into another outlet in the same room or different room the horns don't work. What can I do to resolve this.
Thanks,
Bill
Logged

gil shultz

  • Sr. Member
  • ****
  • Helpful Post Rating: 4
  • Posts: 139
Re: PH508 Alarm
« Reply #1 on: June 21, 2007, 09:42:52 PM »

Sounds like the console and horns are on different phases.  Turn on one or two 240V resistive loads such as an oven or burner. If that solves the problem you are on two different phases if not it is still possible.   Start by putting them on the same circuit, if that woks keep expanding if not be sure you have no plug strips, ups or other electronic devices plugged in.  Sony TVís are especially bad.  If you read through the postings you will probably find somebody has had a problem with just about every device in your home. There are many articles posted here telling how to bridge the two phases.

Good Luck
Gil Shultz
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.