Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: XPS3A and WS14A  (Read 3811 times)

anhnn100

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
XPS3A and WS14A
« on: August 18, 2007, 06:50:09 PM »

The XPS3A work find, but the WS14A has some thing wrong.  I can turn the light off but not on.  This is the 3-way switch.   What do I need to do to make the WS14A work as well as the XPS3A?

Thanks
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 293
  • Posts: 12856
Re: XPS3A and WS14A
« Reply #1 on: August 18, 2007, 07:03:31 PM »

Sounds like you have the WS14A wired incorrectly to the XPS3A. Sounds like you have the switched load wire on the Line connection of the WS14A so it can only send a control signal to the XPS3A when On.
Can you give details on how you have then connected as the wiring diagrams for each show different connections for their respective mates; as the XPS3A and WS14A are not used together normally; a custom plan maybe needed to do this.
Logged

anhnn100

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: XPS3A and WS14A
« Reply #2 on: August 19, 2007, 10:27:59 PM »

This is what I connected.
SW14A: Red wire to switch port.  Other two line (white and black) go to two line ports. 
XPS3A: Red to control, white wire (neutral) to neutral, white wire to load, black to line

Swap the back and white in SW14A did not help.  SW14A can turn the light off only.

Thanks
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.