Please login or register.

Login with username, password and session length

Author Topic: Simplehomenet.com to release EZSwitch30 10/15/07 X10 Load control solution!  (Read 11429 times)

cheryl11

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1

 
The EZSWITCH is a high current (30Amps) relay module that responds to INSTEON and X10 On/Off commands sent through the power line. The module contains dual relays with available normally-open or normally-closed contacts. Thus, it is possible to switch both legs of a 220VAC 2-phase circuit, and control the load to be activated with either ON or OFF commands. Activating with OFF commands might be desirable in cases where a failure in the switch would leave the load energized.
EZSWITCH30 has a built-in power line interface and its programming control is done through the power line.

“ The EZSWITCH30 has many energy saving applications. One very exciting possibility is for turning off heavy duty appliances, such as water heaters during peak demand hours”
- Cheryl Smith, Director of Marketing

Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.