Please login or register.

Login with username, password and session length
Advanced search  


Author Topic: Sentinel question  (Read 3198 times)

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Sentinel question
« on: December 13, 2007, 12:25:15 PM »

Ok here's my situation:

If I push the right button on my remote, the camera pans right. Likewise for the left, up and down buttons work correctly. The corresponding buttons flash on the AHP interface. This is as it should be.

Here's my problem: If I click on the same right button in AHP that responded to the right button of the remote, the camera pans left. Likewise AHP's left button pans right and the up and down buttons are reversed also.

Any ideas as to why this is happening?
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)


  • Hero Member
  • *****
  • Helpful Post Rating: 53
  • Posts: 758
    • Home Automation Chat
Re: Sentinel question
« Reply #1 on: December 13, 2007, 05:25:54 PM »

Sorry I can't help other then until you find a fix you could turn your monitor upside down.  ;D

So far how do you like the camera?

Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 174
  • Posts: 7085
Re: Sentinel question
« Reply #2 on: December 13, 2007, 06:49:07 PM »

Any ideas as to why this is happening?

The default for the camera is upside down (as in the camera looking down through the bubble). Where as in the software it appears the default is ... as if the camera was setting on the black plastic base Looking up through the bubble).

Does clicking the button that says "mount" reverse the setting for you?
Home Automation is an always changing technology | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.