Please login or register.

Login with username, password and session length

Author Topic: Ninja camera is overpowering other 3  (Read 15856 times)

bhoffman67

  • Jr. Member
  • **
  • Helpful Post Rating: 2
  • Posts: 22
Ninja camera is overpowering other 3
« on: January 09, 2008, 04:39:51 PM »

I'm running Vanguard software, on a XP Home SP2 machine.

My 4 cameras are as follows:
1 - XCam2 (B&W) on front door, set as A2
2 - XCam2 (B&W) on back door, set as A3
3 - Ninja (Color) on living room, set as A1
4 - XCam2 (color) on hallway set as A4

My computer (with video receiver) is at one end of the house about 3' off the ground.
The transceiver module is approximately in the center of the house about 18" off the ground.

In Vanguard, I'm either getting a black and white field of static about 1/4 of the time, the actual image of the location I'm intending on monitoring about 1/4 of the time, a "Accessing Image" picture about 1/4 of the time, or the living room image.  This hold true for ALL 4 cameras.

Is there something I can do to fix this situation?? ???
Logged

zach1234

  • Guest
Re: Ninja camera is overpowering other 3
« Reply #1 on: January 09, 2008, 06:26:26 PM »

Welcome to the world of interfearance. Here this may help....

The maximum range of X10 wireless cameras is 100 feet. The range of your camera depends on environment--wireless interference, wall and home exterior materials, the number of floors the signal is traveling through, etc.--and where you use the camera.

The cameras transmit through walls and ceilings, but you might need to experiment with the orientation of the flat antennas on the camera and Video Receiver. Try to position them so they face each other. This will boost reception range.

Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Ninja camera is overpowering other 3
« Reply #2 on: January 09, 2008, 06:46:20 PM »

Any wireless netwok interfaces or 2.4 Ghz cordless phones in the home? Both can cause interference.
Logged

bhoffman67

  • Jr. Member
  • **
  • Helpful Post Rating: 2
  • Posts: 22
Re: Ninja camera is overpowering other 3
« Reply #3 on: January 10, 2008, 03:38:59 PM »

I live in a 1-story house,
no cordless phones,
yes on the wireless internet router,
all cameras are less than 50' from the video receiver which is mounted about 5' from the ground, at least 3' away from any other electronics and pointed in the general direction of all the 4 cameras.
Logged

zach1234

  • Guest
Re: Ninja camera is overpowering other 3
« Reply #4 on: January 10, 2008, 09:46:01 PM »

I think you or a nabor may have something interfearing with then, or they could be defective.
Logged

bhoffman67

  • Jr. Member
  • **
  • Helpful Post Rating: 2
  • Posts: 22
Re: Ninja camera is overpowering other 3
« Reply #5 on: January 11, 2008, 01:29:58 PM »

Defective.

I'm sure you're right, just called for a RMA... sending everything back.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.