Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Replacement Lens Caps  (Read 13970 times)

ETalmadge

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Replacement Lens Caps
« on: March 21, 2006, 10:22:30 AM »
I am adding a couple outdoor cameras (XC18A) to my system, which I received from a friend.  My friend has no idea where the lens caps went.  I contacted X10 support and they tell me they don't sell replacement caps.  Does anyone know where I can get a couple replacements.  Thx!
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Replacement Lens Caps
« Reply #1 on: March 21, 2006, 10:27:10 AM »
If your refering to the protective clear plastic cap that fits over the lense its self I found the cams to have a better pic with out them on! ;) :)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

ETalmadge

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: Replacement Lens Caps
« Reply #2 on: March 21, 2006, 10:40:09 AM »
That's exactly what I am referring to.  I always just assumed that I would be risking the health of the camera if the cap wasn't installed, considing all the rain and snow where I live.  It can't be good to get water in the lens.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Replacement Lens Caps
« Reply #3 on: March 21, 2006, 01:04:32 PM »
I've ran my wired cam outside under an over hang for over 6 years without one in fact I had to remove it as I was getting a glare with it on!
My cam instructions said not for outside use but under the over hang seems to be enough protection screws have all rusted but other than that and faint image eched into the pic(not a big deal as it is on the same thing) everything works as good as day one! ;) :)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

ETalmadge

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: Replacement Lens Caps
« Reply #4 on: March 21, 2006, 01:58:44 PM »
Sounds great.  Thanks.   
Logged

1of2

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: Replacement Lens Caps
« Reply #5 on: March 23, 2006, 10:28:44 PM »
I just pull them off and throw them away. I don't think the camera is intended to be used with it on.
Logged

rick

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Replacement Lens Caps
« Reply #6 on: April 30, 2006, 08:21:40 AM »
I replaced one of my lost lens caps with a top of a hair spray bottle. It fit perfectly!
Logged

jonk

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 42
Re: Replacement Lens Caps
« Reply #7 on: May 07, 2006, 07:32:30 AM »
How the heck do ya get the caps off? I've tried pliers and i'm afraid it's going to crack if i try much harder! BTW i have xcam2...
Logged

zach1234

  • Guest
Re: Replacement Lens Caps
« Reply #8 on: January 30, 2008, 04:39:39 PM »
Yours was probly used and returned with the cap glued ON. I had it happen Get a RMA.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.