Please login or register.

Login with username, password and session length
Advanced search  


The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: Motion Sensor Question  (Read 1970 times)


  • Jr. Member
  • **
  • Helpful Post Rating: 1
  • Posts: 10
Motion Sensor Question
« on: April 18, 2008, 12:40:51 AM »

Heres what I want to do.
When motion is detected in the dining room through a motion sensor I want our china cabinet light to come on.
So I need a Motion Sensor, lamp/appliance module but do I need a tranceiver??? I guess because the sensor is wireless? Is there a plug in sensor to eliminate the transceiver?
 So what the best way to do this?
The only thing I already have is a IR543 working a couple light switches...


  • Hero Member
  • *****
  • Helpful Post Rating: 41
  • Posts: 631
Re: Motion Sensor Question
« Reply #1 on: April 18, 2008, 06:16:30 AM »

Yes you will need a transceiver but if you use the one X10 sells (TM751) you will not need a lamp or appliance module for the light as the transceiver has an appliance module built in. Just be prepared to listen to the noise of the relay each time it is activated.
_ _ ...  ..._ _ | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.