Please login or register.

Login with username, password and session length
Advanced search  


The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: Problems with Lamp Module  (Read 5314 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Problems with Lamp Module
« on: June 15, 2008, 12:01:44 PM »

I have my entire system set up, but for some reason, the lamp module will not turn on the lights with the remote.

The house code on the module is the same as the code on the console, and the unit code is different.  From the instructions, it seems that the lamp should turn on via the remote.  This is not the case though.

Has anyone else had this issue, and if so, how did you correct it?

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 289
  • Posts: 12766
Re: Problems with Lamp Module
« Reply #1 on: June 15, 2008, 12:48:04 PM »

You may have a signal problem to the Lamp Modules Location. As a test try it in a few places in the home and see if it works in some areas and not others. Even try it in the same outlet as the console is connected. Maye sure the unit code is one of the standard buttons on your remote.
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.