Please login or register.

Login with username, password and session length

Author Topic: MS10A - 1 or 2  (Read 2321 times)

PajamaGuy-ß

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
MS10A - 1 or 2
« on: September 21, 2008, 08:48:48 AM »

Expurt Help Wanted!

The data sheet for the MS10A sez, "Set to 2 to trip the alarm only after 2 movements are detected (helps prevent false alarms)."   It also sez that after a red-light blink it won't see motion again for about 45 seconds.

My questions are:
1. When set on "2" does ANY RF transmission occur on 1st movement?
2. Does the RED led indicate RF transmission or IR detection?
3. When there's constant motion, what is the sampling delay between motion 1 and motion 2?

Thanks!

Logged

PajamaGuy

  • Hero Member
  • *****
  • Helpful Post Rating: 32
  • Posts: 522
Re: MS10A - 1 or 2
« Reply #1 on: September 23, 2008, 05:30:28 PM »

From X10 -

1) No.
2) In mode 2, the first blink indicates IR detection only; the second indicates both RF transmission and IR detection.
3) Ten seconds.
 
>It also says that after a red-light blink it won't see motion again for about 45 seconds.
That should say "after a red-light blink that includes RF transmission..."
My questions are:
1. When set on "2", does ANY RF transmission occur on 1st movement?
2. Does the RED led indicate RF transmission or IR detection?
3. When there's constant motion, what is the sampling delay between motion 1 and motion 2?
Logged
PajamaGuy
Win-7 - Dell XPS -Automation
VA12a on a dedicated desktop - Video
XTB-IIR & V572RF32

Remote via LogMeIn (FREE) and Ignition
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.