Please login or register.

Login with username, password and session length
Pages: 1 [2]

Author Topic: Control CM11, CM12, CM15, CM17, or CM19 from iPhone or iPod Touch!  (Read 31759 times)

Melloware

  • Full Member
  • ***
  • Helpful Post Rating: -2
  • Posts: 61
    • Melloware
Re: Control CM11, CM12, CM15, CM17, or CM19 from iPhone or iPod Touch!
« Reply #15 on: June 26, 2009, 10:32:53 AM »

Just wanted to let everybody know that X10 Commander now supports MacOSX server natively thanks to the wonderful folks over at ThinkingHome.  This way if you have a Mac you won't have to run X10 Commander Server in Parrallels or VMWare Fusion anymore just to run my little app.

http://www.alwaysthinking.com/thinkingHome.html

Logged
------------------------------------------------
Melloware
Tack Back Control of Your PC!
http://www.melloware.com
------------------------------------------------

wharfrat

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Control CM11, CM12, CM15, CM17, or CM19 from iPhone or iPod Touch!
« Reply #16 on: July 28, 2009, 06:35:00 AM »

Check out these two products....  X10 commander should hit the AppStore any day now.



I could use some help here. I would like to download x10 Commander to my iphone to use with my PC to (Via internet) control an appliance or two. Please help me to decide what controller I need.......(cm11, cm12.....?)
And, what is involved in the set-up. If there is a FAQ or set of instructions that i can read, please point me to them.

Thank You
Logged

Melloware

  • Full Member
  • ***
  • Helpful Post Rating: -2
  • Posts: 61
    • Melloware
Re: Control CM11, CM12, CM15, CM17, or CM19 from iPhone or iPod Touch!
« Reply #17 on: July 28, 2009, 07:08:31 AM »

wharfrat,

I recommend a CM15 USB since they are easier to find since I think they stopped making the CM11 and a lot of computers don't have serial ports.

As for X10 hardware and setup well that is best left to the X10 instructions that come with your hardware.  X10 Commander is only for controlling your lights not instructions on how to set up your lights.

After that you simply run our X10 Commander EXE on the PC connected to the USB CM15 and then your iPhone X10 Commander connects to the PC and controls your lights.  That's pretty much it.

IF you are using a CM15 don't forget to install the SDK Drivers: http://www.x10.com/activehomepro/sdk/index.html but if you are using a CM11 or CM17 you do not need those SDK drivers.
Logged
------------------------------------------------
Melloware
Tack Back Control of Your PC!
http://www.melloware.com
------------------------------------------------

wharfrat

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Control CM11, CM12, CM15, CM17, or CM19 from iPhone or iPod Touch!
« Reply #18 on: July 28, 2009, 12:50:37 PM »

wharfrat,

I recommend a CM15 USB since they are easier to find since I think they stopped making the CM11 and a lot of computers don't have serial ports.

As for X10 hardware and setup well that is best left to the X10 instructions that come with your hardware.  X10 Commander is only for controlling your lights not instructions on how to set up your lights.

After that you simply run our X10 Commander EXE on the PC connected to the USB CM15 and then your TiPhone X10 Commander connects to the PC and controls your lights.  That's pretty much it.

IF you are using a CM15 don't forget to install the SDK Drivers: http://www.x10.com/activehomepro/sdk/index.html but if you are using a CM11 or CM17 you do not need those SDK drivers.


thank u
is the cm17 USB?
Logged

Melloware

  • Full Member
  • ***
  • Helpful Post Rating: -2
  • Posts: 61
    • Melloware
Re: Control CM11, CM12, CM15, CM17, or CM19 from iPhone or iPod Touch!
« Reply #19 on: July 28, 2009, 12:59:45 PM »

I think only the CM15 and CM19 are USB.
Logged
------------------------------------------------
Melloware
Tack Back Control of Your PC!
http://www.melloware.com
------------------------------------------------

wharfrat

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Control CM11, CM12, CM15, CM17, or CM19 from iPhone or iPod Touch!
« Reply #20 on: July 28, 2009, 01:26:02 PM »

I think only the CM15 and CM19 are USB.
x10 offers cm19a alone and with video USB connector 
Do I need that if I don't plan to use a camera?
Logged

Melloware

  • Full Member
  • ***
  • Helpful Post Rating: -2
  • Posts: 61
    • Melloware
Re: Control CM11, CM12, CM15, CM17, or CM19 from iPhone or iPod Touch!
« Reply #21 on: July 28, 2009, 01:36:07 PM »

I apologize I don't know much at all about Cameras and X10.  I don't own any.
Logged
------------------------------------------------
Melloware
Tack Back Control of Your PC!
http://www.melloware.com
------------------------------------------------

Melloware

  • Full Member
  • ***
  • Helpful Post Rating: -2
  • Posts: 61
    • Melloware
Re: Control CM11, CM12, CM15, CM17, or CM19 from iPhone or iPod Touch!
« Reply #22 on: December 29, 2009, 11:25:01 AM »

X10 Commander was featured in an Apple Ad in the UK for the holidays.  Check out the commercial, X10 Commander is used to turn the Xmas Tree ON!


http://www.visit4info.com/advert/12-Apps-for-Christmas-Apple-iPhone/80865
Logged
------------------------------------------------
Melloware
Tack Back Control of Your PC!
http://www.melloware.com
------------------------------------------------
Pages: 1 [2]
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.