Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: MS16A ??  (Read 2288 times)

hpdrifter

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 68
MS16A ??
« on: October 22, 2008, 09:14:19 PM »

I'll try to use the space I created mistakenly here.

I've had a MS16A(herein referred to as a 16 if needed) for nearly 2 months and I had it set on off time of 1.  To use the analog setting in the potentiometer to get the "off" signal; ~45 s..  Worked good AND I got a "Off" registrer on the Activity Log.  Just now got to changing this to a 1 and then 2 for 2 minutes or 4 minutes, respectively.  Never got an "off" signal.  Switched it back to the "1" setting and increased the potentiometer so the off time was ~minute thirty seconds.  Still no "off" signal for "Housecode"Unit code" for which it was set to, but the Appliance module via a macro worked.

????  Is This they way it's supposed to work?  It seems that the HC/UC would still have to be sent for the macro to work, but there is no activity in the AM.
« Last Edit: October 23, 2008, 09:43:49 PM by hpdrifter »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.