Please login or register.

Login with username, password and session length

Author Topic: Ninjas Won't switch  (Read 4502 times)

Catfish

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Ninjas Won't switch
« on: January 24, 2009, 05:23:50 PM »

>*< I have 2 [two] ninja pan and tilts w/cams, receiver set to freq B, and 1 TM751. All cams are set to proper codes, freqs and chanels. With all cams and tm751 plugged into the same outlet, the cams won't switch. ??? Any Help? *None from X10. Imagine that!*
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Ninjas Won't switch
« Reply #1 on: January 24, 2009, 07:03:09 PM »

.....All cams are set to proper codes, freqs and chanels. With all cams and tm751 plugged into the same outlet, the cams won't switch.

By "All cams are set to proper codes" do you mean the cameras are set in a group of four? With camera one being Unit/House codes say: C1, and the second camera C2, and the third C3?
Logged
Home Automation is an always changing technology

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Ninjas Won't switch
« Reply #2 on: January 24, 2009, 07:27:29 PM »

What remote are you using. I did not see your listing one.
As mentioned all the addressable power supplies have to be on the same house code and in a group of four unit codes. 1-4;5-8;9-12 and 13-16.
When one in the group is turned on the other three units in that group will turn off.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.