Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: all I get is lines in Vanguard ... tried everything  (Read 6307 times)

Targa

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
all I get is lines in Vanguard ... tried everything
« on: January 26, 2009, 09:16:27 PM »

Have Vangurad open, and all I get is a bunch of 2" wide lines at the bottom of the vanguard display screen.

Camera is an xcam2
I only have one installed for now.
There is no ability to change the channel on these camera's that I can see.
I have tried all channels on the video reciever with no success on any of them.
Have switched out different cameras to assure it is not the camera.
Have the USB Video input adapter installed as well as the driver.
Camera is 4 feet from the receiver.
All drivers have installed with no visible issues.

Anyone have any ideas ?



Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 174
  • Posts: 7043
Re: all I get is lines in Vanguard ... tried everything
« Reply #1 on: January 27, 2009, 01:22:25 AM »

  • ....and all I get is a bunch of 2" wide lines at the bottom of the vanguard display screen.
  • There is no ability to change the channel on these camera's that I can see.

On the cameras base... you should see a little rubber oval. If you carefully pry up the oval plug you will see the tiny little channel selector. Maybe try the setup on a TV first. Your doing things the correct way by testing and learning the setup processes before mounting the cameras.
Logged
Home Automation is an always changing technology
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.