Please login or register.

Login with username, password and session length

Author Topic: Which switch is best for bathroom vent fan? WS467 keeps fan on too low.  (Read 2714 times)

bigguy1217

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4

The wall plate is a double plate, one for light and one for vent fan. It is a  small bathroom so I want both controled. I tried a WS467 but when the fan come son it is WAY slowey than with standard switch. Is the a heavier duty switch that will still fit in a double plate?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259

You can not use any two wire dimmer switch on a fan motor. The switch steals power through the load.
Also using any dimmer switch with a motor can be a problem. Unless designed for inductive loads.
They do make wall switches that have a relay in them to control loads like a fan motor. Do you know if the switch box has a Neutral Power wire in it? A neutral is needed for the switch to work as it does not steal power through the load.
Logged

trol1374

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 68

  As what Brian said.... and if you do have the neutral wire, then use the pro rocker switch.  It is an on/off style switch and they look nice.  They do make a "clunk" sound when activated on/off. 
   Look at the x10pro stuff.
Logged

BVD

  • Sr. Member
  • ****
  • Helpful Post Rating: 11
  • Posts: 105

Give this a try. Might have to buy a 3.00 cover plate with one toggle opening and 1 paddle opening.
See attached sketch for proper wiring.

Till Later,
Bob
« Last Edit: March 21, 2009, 12:14:24 AM by BVD »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.