Please login or register.

Login with username, password and session length

Author Topic: VCR Commander  (Read 4054 times)

newbomb

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
VCR Commander
« on: September 05, 2009, 10:42:31 PM »

Gave up on Vanguard for now. Have my camera's and motion detectors working into my VCR commander. Starts and stops the vcr, great. Since the vcr is not wireless how does it records the camera images?

Thanks,
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: VCR Commander
« Reply #1 on: September 06, 2009, 10:14:53 AM »

Do you have a video receiver? If not tell us what you where trying to use with the Vanguard Software.
If so connect the video signal from the receiver to the VCR's video input. Same for the sound if you have that feature.
If your VCR doesn't have Video and Sound Inputs. I believe the receiver can send the signals by RF on a TV Channel. In that case tune the VCR to the TV Channel being used from the receiver.
Then set the VCR to record from the inputs the receiver is connected to.
« Last Edit: September 06, 2009, 10:17:18 AM by Brian H »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.