Topic: WS467 Switch - Cannot Brighten (Read 5875 times)

air1 · « **on:** October 18, 2009, 08:25:10 PM »

I have installed a WS467 switch to control an incandescent light. However, the light is mostly dimmed although set for 100% in AHP. Adjusting the AHP brightness slide switch does not change the bulb brightness. Original switch only had two wires, and is on a bathroom circuit.

Any suggestions?

Jsnlong · « **Reply #1 on:** October 18, 2009, 09:35:46 PM »

Can you press and hold the button on the switch its self. Does it brighten and dim then?

Check this information out.
http://kbase.x10.com/wiki/Newer_WS467s_and_Preset_Dim

ftp://ftp.x10.com/pub/manuals/ws467-is.pdf

News:

Author Topic: WS467 Switch - Cannot Brighten (Read 5875 times)

air1

WS467 Switch - Cannot Brighten

Jsnlong

Re: WS467 Switch - Cannot Brighten