Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Status update from modules  (Read 3091 times)

blaib

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Status update from modules
« on: November 02, 2009, 12:10:17 AM »
It would have been really good if X10 would have had a two way setup so that when you turned on a light via light switch Active home would recognize it and show the light switch on the computer screen on instead of off.  Would that be too much of a problem to have done?

Only down big down fall I have seen.
Brian
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13260
Re: Status update from modules
« Reply #1 on: November 02, 2009, 06:29:03 AM »
A complete redesign of the modules to add a power line transmitter to them.

X10 at one time had a few two way modules. LM14A Lamp and AM14A Appliance. Now discontinued.

There are two way modules made by other manufacturers, but a a much higher cost than X10's.

One Smarthome Insteon wall switch that can have a X10 address added to it is $46.00. They handle bright and dim commands differently; when locally set with their local paddle; sending data  back on the power line for the controller to receive. Their Icon version slightly less in price.
« Last Edit: November 02, 2009, 07:17:39 AM by Brian H »
Logged

joako

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 24
Re: Status update from modules
« Reply #2 on: November 26, 2009, 06:32:41 PM »
I think a workable solution is to use XPFM or XPDF to drive the devices and control them from XPT or other controllers. I don't have much experience with the ActiveHome software so I couldn't tell you for sure if that works....
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Status update from modules
« Reply #3 on: November 28, 2009, 06:05:08 PM »
Quote from: blaib on November 02, 2009, 12:10:17 AM
It would have been really good if X10 would have had a two way setup so that when you turned on a light via light switch Active home would recognize it and show the light switch on the computer screen on instead of off.  Would that be too much of a problem to have done?

Only down big down fall I have seen.
Brian
Smarthome.com has X10/Insteon module the transmit status.
Logged
"This aftershave makes me look fat"

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2286
    • XTB Home Page
Re: Status update from modules
« Reply #4 on: November 28, 2009, 08:09:17 PM »
Leviton also makes X10 compatible switches that transmit status.  But, they aren't cheap.

Jeff
Logged
X-10 automation since the BSR days

Mellowmark

  • Hero Member
  • *****
  • Helpful Post Rating: 6
  • Posts: 195
  • M M Electric
Re: Status update from modules
« Reply #5 on: November 28, 2009, 08:14:06 PM »
What are the model numbers that are available from Leviton. I thought they discontinued their x10 line.
Logged
M M ElectricMan

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2286
    • XTB Home Page
Re: Status update from modules
« Reply #6 on: November 29, 2009, 09:35:35 AM »
A quick Google search yields:

HCM06-1TW - 600W 2-way dimmer switch
HCM10-1TW - 1000W 2-way dimmer switch
HCS08-1TW - 1000W / 8A 2-way relay switch for fluorescent & magnetic low-voltage lighting

The best price I saw was from Fruit Ridge Tools (an eBay seller).

Jeff
Logged
X-10 automation since the BSR days
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.