Please login or register.

Login with username, password and session length

Author Topic: A motion sensor for each Macro???  (Read 11509 times)

JJtech

  • Sr. Member
  • ****
  • Helpful Post Rating: 0
  • Posts: 101
A motion sensor for each Macro???
« on: January 07, 2010, 07:33:30 PM »

Hi,

Don't jump on me, I read a lot of the posts on "else," etc.  I have several macros that have NOTHING to do with each other, they perform separate functions.  I can not combine them and they don't need "elsessss."  Just to double check, do I understand that I need a separate motion sensor for each independent macro???  Does anyone understand the logic behind this?  Why do the macros link if they have the same trigger?  Is there any workaround???? Was the system designer on drugs?

Thanks
« Last Edit: January 07, 2010, 07:53:36 PM by JJtech »
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: A motion sensor for each Macro???
« Reply #1 on: January 07, 2010, 08:23:15 PM »

If you want the macros to run separately, performing different functions, then they would have to have separate triggers. Otherwise if all using the same trigger, they would all run at the same time. If you are using motion sensors as your trigger,  then yes, you need separate motion sensors.

However your comment "does anyone understand this logic?" and "was the system designer on drugs" makes me think I may not be understanding your question.
Logged
"This aftershave makes me look fat"

dbemowsk

  • Hero Member
  • *****
  • Helpful Post Rating: 21
  • Posts: 428
    • PHP Web Scripting
Re: A motion sensor for each Macro???
« Reply #2 on: January 07, 2010, 08:42:28 PM »

Here is what I gathered from your post.  You have 2 macros that need to be able to be triggered independently of each other, but at times you need them both to be run from 1 trigger?  If this is the case, can't you create a third macro for the 1 trigger, and have that trigger the 2 other macros???

What are you trying to do exactly?

Dan B.

Logged
Dan Bemowski
Owner of PHP Web Scripting LLC
Programmer of RemoteWatch X10
User of any X10 products I can get my hands on.

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: A motion sensor for each Macro???
« Reply #3 on: January 07, 2010, 08:47:25 PM »

Is there any workaround????
there is a work arround for almost everything here. But like dbemowsk stated we need to know exactly what your trying to do! Be very detailed in your questions here, it saves lots of time! and hair pulling! rofl
 >!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

JJtech

  • Sr. Member
  • ****
  • Helpful Post Rating: 0
  • Posts: 101
Re: A motion sensor for each Macro???
« Reply #4 on: January 07, 2010, 08:52:59 PM »

Thanks Dave.

I want them to run at the same time but doing different functions that I can not really combine into one macro.

Reduced down to the very simplest form, they are like such:

Macro 1 turns on Light A1 when motion sensor D1 triggers ON.
Macro 2 turns on Light A2 when motion sensor D1 triggers ON.

I tried to put a picture of the macros in a word doc to post but it is 790 KB (over the stated limit).

How can I send them to you?

JJ


 



 

Logged

JJtech

  • Sr. Member
  • ****
  • Helpful Post Rating: 0
  • Posts: 101
Re: A motion sensor for each Macro???
« Reply #5 on: January 07, 2010, 09:09:56 PM »

OK, I got the files down to allowable size.

Here are the three macros.  There may be some very complicated way to combine them but I have other macros that have to do with cameras and emails, etc. that would make it a nightmare.

See if this helps.

Thanks, JJ
Logged

JJtech

  • Sr. Member
  • ****
  • Helpful Post Rating: 0
  • Posts: 101
Re: A motion sensor for each Macro???
« Reply #6 on: January 07, 2010, 09:11:51 PM »

Sorry, new to attaching files.  Here are the other two.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.