Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: Socket Rocket  (Read 2781 times)

Squirrel1162

  • Full Member
  • ***
  • Helpful Post Rating: 2
  • Posts: 70
Socket Rocket
« on: May 24, 2010, 10:28:20 AM »

I recently purchased two (2) socket rockets along with a lamp module and control unit.  I have the lamp module installed and it works great.  However, I can't seem to get the socket rockets to work at all!  I am running Windows 7 on my laptop.  Any ideas as to what I might be doing wrong?  Any tips, tricks and help will be greatly appreciated.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 291
  • Posts: 12834
Re: Socket Rocket
« Reply #1 on: May 24, 2010, 10:48:50 AM »

Did you try the default address of A1?
Do you have any phase coupling between the phases in the home? As you may have a signal strength issue between the Interface and the socket rocket.
Try moving the Socket Rocket to a different location maybe on the same circuit as the CM15A Interface as a test.

Links to some common problems and troubleshooting.
http://kbase.x10.com/wiki/ActiveHome_Pro
http://jvde.us/x10_troubleshooting.htm
http://forums.x10.com/index.php?PHPSESSID=fia4somvt646m1f9ar60hogk94&topic=7951.0
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.