Please login or register.

Login with username, password and session length

Author Topic: Macro Setup Help  (Read 2199 times)

lee911

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 28
Macro Setup Help
« on: June 29, 2010, 08:00:43 PM »

I'm still learning AHP and Macros and could use some help with this. I want the WS12A to come on from Dusk to Dawn. (The WS12A controls a common light fixture and ONE PR511). The PR511's are internally set to trigger on sensor. This is what I've done......

- 1 x PR511 Sensor (B3) on a common light switch;
- 1 x PR511 Sensor (B2) on a MS12A switch (B1) (controls set of common lights and 1 x PR511);
- AHP timer set from Dusk to Dawn for the WS12A switch;
- Macro (B4) set to come on from Dusk to Dawn and Module Status- ON. Turn B2 ON and turn B3 ON.

Essentially I want BOTH PR511's to come on from Dusk to Dawn, if trigged with motion from either sensor. The WS12A light would always come on and stay on from Dusk to Dawn.

Does this makes sense?

Right now the two PR511's are not triggering each other.

Thanks and I'll keep trying while waiting from some expert advise from this board.

Lee
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.