Please login or register.

Login with username, password and session length
Advanced search  


The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: Sentinel Camera not responding to remote  (Read 1653 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
Sentinel Camera not responding to remote
« on: July 01, 2010, 06:03:25 PM »

All of sudden my Sentinel camera no longer receives commands from the remote.

First it was just the pan and tilt.  Now everything, zoom, focus etc. will not work.

I have it hard wired and the video is fine.

Also, in the past whenever I would disconnect and reconnect the power the supply, the camera would always move back to the center default position.
This no longer happens.

I even took the remote outside, about 10 feet from the camera and it would still not work.

I think the remote is OK.  I plugged in my PSX01 repeater and it does respond from my remote. Fresh batteries were installed too.

I find it hard to believe that all of the motors could go bad at the same time.

Anyone have any idea what the problem might be?

Any help would be greatly appreciated.
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.