Please login or register.

Login with username, password and session length

Author Topic: Measuring Amps of a device  (Read 4385 times)

lviper

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 10
  • Posts: 294
Measuring Amps of a device
« on: January 05, 2011, 11:55:11 AM »

I have one of those inductive meters that can measure the amps of a circuit by looping the inductive clamp over the load wire. This works great at the breaker panel where the hot leads are accessible. Problem is I want to measure the amps for a certain device on the circuit, not the whole circuit. And there isn't an exposed hot lead to clamp around. So I wondered if this would work.

Take a heavy 3-wire extension cord and open the outer insulation exposing the 3 wires. Then I could plug this cord in between the device and the outlet allowing me to clamp the inductive ring over the hot lead. Would this show me just the amps being drawn by the device?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13260
Re: Measuring Amps of a device
« Reply #1 on: January 05, 2011, 12:30:05 PM »

Yes it should.
Logged

Brandt

  • Hero Member
  • *****
  • Helpful Post Rating: 11
  • Posts: 728
  • Sorry miss, I was giving myself an oil-job.
Re: Measuring Amps of a device
« Reply #2 on: January 05, 2011, 12:42:06 PM »

Couldn't use something like a Kill-a-watt on the individual device?
Logged

lviper

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 10
  • Posts: 294
Re: Measuring Amps of a device
« Reply #3 on: January 05, 2011, 01:45:31 PM »

Couldn't use something like a Kill-a-watt on the individual device?

Yes, but I don't have one. I plan on ordering one but need to check a few devices now.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13260
Re: Measuring Amps of a device
« Reply #4 on: January 05, 2011, 02:15:55 PM »

Should work fine for your immediate needs.

I used one at work to test machines on initial start up.
Mine was a five conductor one. Three Phase Lines, Neutral and a safety ground. As the machines where movable and plugged into a 208 three phase wall socket.
Logged

lodtrack

  • Sr. Member
  • ****
  • Helpful Post Rating: 6
  • Posts: 103
Re: Measuring Amps of a device
« Reply #5 on: January 06, 2011, 07:59:37 AM »

For $20.00 I bought a plugin device made by "Blue Planet" (Canadian Tire) It shows,amps,volts and calcs watts. It records peaks of each ,can be set to trip connected load at specific load etc. If you input electricity unit price, it will track accumulated costs for the connected load. For a small cost it is a great device for snooping out electrical equipment etc.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13260
Re: Measuring Amps of a device
« Reply #6 on: January 06, 2011, 10:49:05 AM »

Nice.
I have a Kill A Watt Meter myself.
It also does VA; Line Frequency and Power Factor. Along with Volts; Amps and Watts.
Logged

Knightrider

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 62
  • Posts: 1748
  • I love my WM100!
    • This Automated House
Re: Measuring Amps of a device
« Reply #7 on: January 07, 2011, 08:32:28 AM »

FYI:

Kill-a-watt and Kill-a-watt EZ have both made it to the shack.  I picked up mine for $30.  I have also seen them at Lowe's for $29.xx.
Logged
Remote control is cool,

but automation rules!

lviper

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 10
  • Posts: 294
Re: Measuring Amps of a device
« Reply #8 on: January 07, 2011, 09:13:29 AM »

Logged

Knightrider

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 62
  • Posts: 1748
  • I love my WM100!
    • This Automated House
Re: Measuring Amps of a device
« Reply #9 on: January 07, 2011, 09:43:29 AM »

*DOH*   B:(
Logged
Remote control is cool,

but automation rules!

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Measuring Amps of a device
« Reply #10 on: January 07, 2011, 10:05:04 AM »

*DOH*   B:(
Don't feel to bad I got stung for $80 +
They figured I needed it for my solar setup. Need I didn't, but it has saved me hours of power! rofl
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.