🖥️ActiveHome Pro > Software Problems & Bugs
New & Old (outstanding) AHP Bugs
Tuicemen:
This thread was started as a way to have a single list to track all current AHP bugs.
With this list, the developers have a single place to check for reports of new issues, and can ask for more detail in the thread if needed.
The moderators have complied this list, and are keeping it current. As new bugs are reported, they get added to the top of the "Outstanding Bugs" section.
When the developers report a bug that has been fixed, it gets moved to the "Reported Fixed Bugs" section.
Once users can confirm a bug has been fixed, it is moved to the "Confirmed Fixed Bugs" section at the bottom.
Please let us know if there are bugs that are not listed, or if you can confirm that any of the "Reported Fixed" bugs have been fixed in the latest release.
List of outstanding Bugs as of 3.318:
Bugs that have been reported by the users, and are waiting to be fixed by the developers:
* SDK sends multiple RF commands when used with a CM19A
(v3.318, added 5/15/2012 by Tuicemen)
*AHP fails to load after locking up. If AHP is running and and locks up, a task manager "kill" results in AHP failing to load next time. It also sometimes stops SDK-built programs from working. An "error getting X10 net interface" appears. Some have noticed this with improper PC shut downs, or with a certain Windows Update in Windows 7. Fixing this should be considered a high-priority.
(3/25/2011: Confirmed by X10 developer, but seemingly rare and hard to reproduce at the time. That developer has left X10 since then.)
* User is prompted to choose a file location and name when saving their AHX file, if they used the "browse" function during their session in AHP (such as when adding a Windows command to a macro). The folder defaults to the last-used folder, not the one from which the AHX file was loaded.
(added 2/6/2012 by Noam, but I think it has been around a long time. Confirmed still present in 3.318)
* Commands are no longer "grouped" in macros (ex: "E1, E2, E On" is now "E1, E On, E2, E On").
(v3.318, added 12/27/2011 by Noam)
* Video freezes when other X10 activity occurs.
(v3.314, added 11/2/2011 by Noam, Still reported in 3.318)
* AHP crashes with a runtime error when adding an SC546A Chime Module from the "Pro Modules" category.
(original version unknown, added 10/19/2011 by Noam)
* Macros triggered by a security sensor are run twice, while macros triggered by a normal HC/UC are run only once.
(v3.318, added 10/11/2011 by Noam)
* After upgrading to version 3.318, you can no longer downgrade to an earlier version by installing it over the top of the current one. You need to uninstall the newer one first.
(v3.318, added 10/6/2011 by Noam)
* Macros triggered by an "Off" command (ex: C9 Off) blink when the "On" command (ex: C9 On) is received, but not when the "Off" command is received. The macros still run correctly, though (this is purely cosmetic).
(added 6/26/2011 by Noam, but I think it has been around a long time. Confirmed still present in 3.318)
* After downloading to the CM15A and exiting the program, the "Download needed" indicator returns to the status bar the next time AHP is opened, even if no changes were made. Downloading again does not properly clear the flag (see next item for more).
(v3.311 added 4/18/2011 by Noam, confirmed still present in v3.318)
* When a download is needed, the "Exit without downloading?" prompt is not working properly. The user is prompted, "Are you sure you want to exit without downloading?" "Yes" correctly closes AHP without downloading. "No" currently exits without downloading, but clears the "download needed" indication - which is clearly wrong. It should either close the dialog and return to AHP, or download and exit (in which case it should be changed to "Download and Exit"). "Cancel" closes the dialog and returns to AHP. This is fine if "No" would exits WITH a download). However, if "No" is going to close the dialog and return to AHP, then "Cancel" is not needed.
(v3.311 added 4/18/2011 by Noam, confirmed still present in v3.318)
* Turning on a SoftStart module that was dimmed before being turned off results in an Extended Dim command to the previous dim state, instead of the full 100%. In AHP, the slider momentarily goes to the previous dim state, but then goes to 100%.
(v3.310 added 4/14/2011 by Noam, confirmed still present in v3.318)
* AHSDK sometimes crashes, which prevents any further SDK commands until the "debug" notice is closed.
(first noticed around v 3.305, added 4/6/2011 by Noam, confirmed still present in v3.316)
* Changing a module between "Lamps" and "Old Lamps" does not change the color of the bar at the top until you go out of the room (or AHP) and go back in.
(v 3.310, added 3/25/2011 by Noam, confirmed still present in v3.318)
(ErikP 3/25/2011: Confirmed, but low priority since it is purely cosmetic)
* "Florescent Decorator Switch" (WS13A-L) sends extended commands if defined as a "New" lamp.
(v 3.310, added 3/25/2011 by Noam, confirmed still present in v3.318)
* SDK sends extended commands for Unit codes defined as SoftStart modules in AHP. This happens when sending a specific "ON" command.
(v 3.310, added 3/25/2011 by Noam, confirmed still present in v3.318)
(ErikP 3/25/2011: Currently all commands are run through the same code path which slightly alters commands based on hardware states, so SDK commands may be converted based on module status. This isn't really ideal, so is now on the active bug list.)
* Changing a module between "Lamps" and "Old Lamps" should keep the current "module type" selection, instead of defaulting to the first item in the list.
(v 3.302, added 3/25/2011 by Noam, confirmed still present in 3.318)
(ErikP 3/25/2011: This is intended behavior because only with the "Old Lamps" and "Lamps" is it possible for the module type to exist in more than one category. I will put this in the active bug list, since it would be convenient for those who need to switch module types.)
* The CM15A sends duplicate commands from timers and macros after a reboot or restart of x10nets, until AHP is opened and closed.
(added 3/23/2011 by Noam, confirmed still present in 3.318)
(ErikP 3/29/2011: Problem CAN be duplicated in testing. This is on the list to look into.)
* Opening the Activity Monitor starts two new iexplore.exe processes, without windows. They don't stop when you close AHP.
(added 2/19/2011, confirmed still present in 3.318)
* The "Check for Update" function cannot find new versions of AHP.
(broken since v3.228 9/5/2008, confirmed still broken as of 10/04/2011 - v3.316 can't find update to 3.318)
(ErikP 3/25/2011: Confirmed. This is at the top of my regular priority work list. Its been delayed a bit due to a lot of high priority workload recently, but should be ready soon. The bug is entirely server side, so once it is fixed it will not require an AHP update to take effect.)[/color]
List of Bugs that have been REPORTED fixed as of 3.318:
Bugs reported as fixed by the developers, but not yet confirmed by the users:
* Video goes black and/or flickers in AHP.
(v3.315 added 6/16/2011 by Noam)
(reported fixed in 3.316 7/1/2011. Waiting for confirmation from users)
* The Intro Wizard crashes, when trying to go through the Timers or Macro sections.
(added 4/11/2011 by Noam, confirmed still present in v3.314)
(Reported fixed in 3.315 6/9/2011 - waiting for confirmation from the users)
* There are no Dim, bright or extended X10 messages being sent with the CM19A TM751 combination
(added 2/7/2011)
(ErikP 3/25/2011: Fixed in 3.310. Please let me know if you are seeing anything different, this is kind of important since its really the core functionality of the application.)
List of Bugs that have been CONFIRMED fixed as of 3.318:
Bugs confirmed as fixed by the users:
* Macros with time-based conditions do not work for some users. Other conditions work fine for those users.
(added 3/6/2011 by Noam, Fixed in 3.315 6/9/2011)
* Non-SoftStart lamp modules fail to turn on when a dusk on timer is used. I haven't tested the dawn setting or a off one.
(problem began with 3.302, but proper settings took care of this one)
* Module history button should return the last transactions for that device's address, not actions for all house codes.
(added 2/12/2011, corrected in 3.310)
* Dim Status of new softstart defaults to either "Off" or "100%"when the Status Report is opened or AHP is closed and reopened.
(added 1/19/2011 by Noam, corrected in 3.310)
* The CM15A does not correctly adjust for Daylight Savings Time when not connected to the PC.
(corrected in v 3.264 3/23/2010)
* The issue with installing plug-ins after AHP still causes issues.
(added 1/6/2011, fixed with new installer in v3.310)
* Installing iwatchout (video plug-in) causes AHP to fail.
(fixed with new installer in v3.310)
* AHP and the SDK still reports info received from some security sensors
In my case I get M1 SOCIALITE, c8,...... reported with the SDK and M MTCDDVD in AHP
(fixed in 3.318 10/3/2011)
Edited 5/16/2012 by Noam. Edited two items for clarity.
Tuicemen:
well I'm not sure whats going on! ??? ???
I decided that maybe the like at the download center was pointing to the wrong file.
So I went to http://software.x10.com/pub/applications/activehomepro/ and downloaded the file. hey third time was a charm! ::) :'
now if the link in AHP would work it would save a lot of hassle! ::) :'
mike:
went there, done that. still at 3.296 one one xp sp3. maybe this one needs 4 tries. win7 64bit updated first try.
Tuicemen:
well I'm glade it's not me! rofl
I thought I was going crazy. I'm not sure if it is the link at http://www.x10.com/support/support_soft1.htm that is in compatible with some versions or It just needs 3-4 tries ::) :'
in any case the link I posted first only took one install try, however I had tried twice before with the other link! ::) :'
Noam:
--- Quote from: mike on January 16, 2011, 07:48:34 AM ---went there, done that. still at 3.296 one one xp sp3. maybe this one needs 4 tries. win7 64bit updated first try.
--- End quote ---
Did the version listed next to the link say 3.296, or 3.304?
If the version listed on that page was not correct, you probably need to clear your browser cache and try again.
Navigation
[0] Message Index
[#] Next page
Go to full version