Please login or register.

Login with username, password and session length

Author Topic: SC1200 & Security Remote Control (SH624)  (Read 3422 times)

sfcubster

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
SC1200 & Security Remote Control (SH624)
« on: March 23, 2011, 11:21:23 PM »

I have recently purchased the SC1200.  The kit came with a Security Remote Control (SH624).  The Remote Control basically works except for the Arm Home button.  When I press on Arm Home, it acts like I pressed on Arm Away.  The lights flash and the SC1200 plays the exit chime.  Does the SC1200 work with the Security Remote Control?  Any suggestions?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: SC1200 & Security Remote Control (SH624)
« Reply #1 on: March 24, 2011, 10:52:20 AM »

Near the bottom front edge of the SH624 is a Max Min Exit Delay Switch.
Set it to Min.

If it is set to Max. The delay is added to both Arm Home and Arm Away functions of the SH624.

If you had let the exit delay time out. After you pushed the Arm Home Button on the SH624. The display on the SC1200A would indicate Arm Home.

The other thing that could happen. If it is set to Min exit delay and you Arm Away from the SH624. There is no exit delay. It is like you set it with a keyfob.
« Last Edit: March 24, 2011, 11:44:10 AM by Brian H »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.