Please login or register.

Login with username, password and session length

Author Topic: sc1200 and AHP  (Read 3290 times)

bigdogtec

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
sc1200 and AHP
« on: May 20, 2011, 10:58:19 PM »

I dont have a landline and was wondering if there was a way to know if an alarm is tripped on my sc1200.  I do have both AHP and the sc1200 security system
Logged

pseeker

  • Sr. Member
  • ****
  • Helpful Post Rating: 12
  • Posts: 125
Re: sc1200 and AHP
« Reply #1 on: May 21, 2011, 10:38:18 AM »

It is possible to put system together to send an email alert, once you have email capability you can send a text message via email.

The pieces I'm putting together  is AHP running on computer running 24x7, CM15A (receives X10 power line commands lights on/off sequence from the SC1200 during alarm trigger), modified X10SW which is not currently available (see http://forums.x10.com/index.php?topic=17541.0), and email script.  The author of X10SW Tuicemen is looking into adapting the program to work with the SC1200.       Finally,  You must be a dedicated tinkerer to go through all this trouble.   Additional notes;  X10SW requires only SDK and AHP is not requirement.

It confounds me that this feature not built into AHP and OnAlert

If you have an old wireless laptop around, it might be easier to buy magicjack voip and use that as dedicated alarm phone line (this is what I have right now.) to get the alert and remotely arm disarm the old fashion way.   You can replace the magicjack/laptop combo with VOIP ATA device/ethernet/wireless bridge

Logged

bigdogtec

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Re: sc1200 and AHP
« Reply #2 on: May 21, 2011, 11:59:11 PM »

How do you set up the e-mail alert?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.