Please login or register.

Login with username, password and session length

Author Topic: Install SH10A  (Read 2054 times)

harrydr

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 19
Install SH10A
« on: June 16, 2011, 02:49:27 PM »

Any way or macro to install SH10A Powerhorn to work with AHpro.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Install SH10A
« Reply #1 on: June 16, 2011, 03:20:17 PM »

The SH10A needs a continuous stream of, one second On Off cycles to its address or an All Light, On All Units off to its House Code.
Takes four cycles to trigger it. So sending it a simple On or Off will not trigger it.

Adding it to AHP may not be an available option. I could not find it in the modules list of AHP.

If you want it to ding dong. Send it an On command to its address. Then send bright and dim commands to its House Code. It will ding and dong.

Another thought. I don't have On Alert Plug In so I don't know if it can be added if you have On Alert.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.