Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: Video sender needs a battery pack.  (Read 6575 times)

Digital4u

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Video sender needs a battery pack.
« on: June 26, 2011, 04:46:03 AM »

Hi,

For a graduation party, hooked up the video sender to a roving camcorder.  Receiver to a Sony projector.  Walked the large hall projecting guests on the big screen.  Worked well though the signal was a bit weak. 

Problem.  The power cord for the sender. 

We need three people to manage the system.   One at the receiver to face the unit to the moving camera.  Second person managing the extension cable and facing the sending unit to the receiver.  Third person is the camera man.  Need to get rid of the AC cable.  Hassle and guests might trip on the cord. 

Do we have a battery pack to power the X10 video sender?

Thanks.

D4u

Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 291
  • Posts: 12834
Re: Video sender needs a battery pack.
« Reply #1 on: June 26, 2011, 09:20:44 AM »

I have never seen one for the video sender.
I would think you maybe able to get a battery pack with the same DC voltage out and connect it through a power plug that matches the senders DC input.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 137
  • Posts: 6094
Re: Video sender needs a battery pack.
« Reply #2 on: June 26, 2011, 05:35:21 PM »

Interesting idea.
Putting 2.4GHz omni antennas on the Sender and Receiver might eliminate the hassle of changing aim of the paddle antenna.
http://forums.x10.com/index.php?topic=20485.0
Logged
"This aftershave makes me look fat"

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 174
  • Posts: 7044
Re: Video sender needs a battery pack.
« Reply #3 on: June 26, 2011, 10:43:55 PM »

Modifying the antenna will help. You can also make the sender mobile. I have a cigarette-lighter, to 120 volt AC adapter. As a test I have plugged the video senders wallwart into the 12 to 120 volt AC adapter. The 12 to 120 volt adapter I then plugged into a 12 volt car starter/rechargeable power supply. It worked fine in my test.

I have also used a receiver and small 7 inch TV in a similar setup as a way to check a cameras placement without running back and forth, inside and back outside.
Logged
Home Automation is an always changing technology

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 137
  • Posts: 6094
Re: Video sender needs a battery pack.
« Reply #4 on: June 27, 2011, 10:31:11 AM »

The 12 to 120 volt adapter I then plugged into a 12 volt car starter/rechargeable power supply. It worked fine in my test.

Did you try using the 12V cigarette adapter to power the Sender directly from the battery pack? That should have worked also.
Logged
"This aftershave makes me look fat"

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 174
  • Posts: 7044
Re: Video sender needs a battery pack.
« Reply #5 on: June 27, 2011, 09:58:31 PM »

Did you try using the 12V cigarette adapter to power the Sender directly from the battery pack? That should have worked also.

Nope. My test was fast and dirty.... but it worked.
Logged
Home Automation is an always changing technology
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.