Topic: X10 2-pin Appliance Module (Read 2889 times)

bravpt1 · « **on:** August 30, 2011, 12:22:56 PM »

the module was working fine, then the light went off and maybe it came with overshoot because the module stopped working.
which would be the problem?

I know the problem is very generalized, but any help would be great.

sorry for my english

Dan Lawrence · « **Reply #1 on:** August 30, 2011, 10:51:30 PM »

Are you in America or French Canada? What amperage was the bulb? If the bulb went bang and shorted, it could affect the module and remember, Appliance Modules don't dim.

dave w · « **Reply #2 on:** August 31, 2011, 11:21:44 AM »

Quote from: bravpt1 on August 30, 2011, 12:22:56 PM

the module was working fine, then the light went off and maybe it came with overshoot because the module stopped working.
which would be the problem?

Unfortunately when a bulb burns out (nice blue flash and audible snap) it frequently also destroys an X10 Socket Rocket, Lamp Module, and Wall Switch. But this is the first instance I have heard of where a bulb burnout effects an Appliance Module. Plug the Appliance Module in to the same outlet as your controller. With nothing plugged in to it, does the Appliance Module make any sound when you send it ON and OFF commands? If not, it is probably trash bin material.

News:

Poll

which would be the problem?

Author Topic: X10 2-pin Appliance Module (Read 2889 times)

bravpt1

X10 2-pin Appliance Module

Dan Lawrence

Re: X10 2-pin Appliance Module

dave w

Re: X10 2-pin Appliance Module