🔌General Home Automation > Original ActiveHome
Conversion from Activehome to Activehome Pro
BrockParker:
Found old files from Activehome.
Downloaded to Pro.
Saved in interface.
Cannot turn on or off any modules...(A) from computer or from remote control.
If I replace the Pro interface with the prior interface remote works on all modules.
Any idea what I am missing.
I bought 2 packages for 2 homes, tried both interfaces with same results. So is looks to be not the interface.......
Thanks in advance.
Brian H:
You opened the files using the Active Home choice for file type?
My thoughts are the latest AHP has a module list for Lamp Modules and Older (Before Soft Start).
If the modules you can't controll are not soft start {Ramp On and Off } redefine them from the Older module list.
Also Check the Tools, Hardware Configuration, Transceived House Codes. Auto sometimes does not pick the house codes used by the remotes. Specific maybe a better way to go.
BrockParker:
Download did not show active home choice...only activehome pro and activehome, I used activehome.
When working my lamp modules do dim, but all the way up then down. So might be the soft start issue.
I did try with the Older Lamp definition and no difference.
Also tried with Specific specified, no difference.
Looked in Activity monitor, all there, house codes and all.....
Brian H:
I may have confused thing.
I was trying to ask. In AHP, when you opened the older AH files. You used the File Type "Active Home".
BrockParker:
yes
Navigation
[0] Message Index
[#] Next page
Go to full version