Please login or register.

Login with username, password and session length

Author Topic: Problem with Nstinct Remote controlling Direct TV HD H24 box  (Read 8546 times)

sazzam

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 28
Problem with Nstinct Remote controlling Direct TV HD H24 box
« on: December 08, 2011, 01:01:09 PM »

Problem with Nstinct Remote controlling Direct TV HD H24 box

I have a DirectTv HD H24 receiver. I am having trouble with channels that are more than one digit.

Example: Channel 7 works immediately.
Channel 295 you have to keep the remote pointing to the receiver because the Nstinct pauses between each digit.

If I move my remote away while the 3 digits (ex channel 255) is still populating, I might end up with channel 25 or 55.

Please help.
Logged

Alan V

  • Hero Member
  • *****
  • Helpful Post Rating: 8
  • Posts: 171
Re: Problem with Nstinct Remote controlling Direct TV HD H24 box
« Reply #1 on: January 10, 2012, 12:01:14 PM »

The remote sends one digit at a time.  You can try to minimize the idle time between sending digits.  Press Home/Setup/Advanced/Options.  Set the "Key Transit Time" to its lowest setting (slider all the way to the left).
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.