Please login or register.

Login with username, password and session length

Author Topic: Need help for new installs  (Read 3776 times)

713it

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Need help for new installs
« on: March 04, 2012, 10:54:18 PM »

Hi Everyone,
I was hoping that the forum can shed some light on the best way to achieve my goal in my install.

I have 3 locations that i would like to monitor (2 stores and my house).
What would be the best or ideal install to monitor, record and if possible send the 2 store feeds to my house?

Thank you in advance for your help.
Tony
Logged

kenrad

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 198
Re: Need help for new installs
« Reply #1 on: March 05, 2012, 04:50:04 PM »

I would look at IP cams and blue iris software for this.  x10 cams offer poor resolution and their software is limited


 >! Ken
Logged

X10 Repair Depot

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 20
  • Posts: 311
  • I am here to help
Re: Need help for new installs
« Reply #2 on: March 06, 2012, 08:27:42 AM »

Hi Everyone,
I was hoping that the forum can shed some light on the best way to achieve my goal in my install.

I have 3 locations that i would like to monitor (2 stores and my house).
What would be the best or ideal install to monitor, record and if possible send the 2 store feeds to my house?

Thank you in advance for your help.
Tony

If you are talking about our wireless non-IP cameras, you can do what you are asking but as kenrad said, the resolution is not so good and the software is limited.

However, our Airsight IP cameras are the way to go for your application. These have good resolution, IR night vision, and the ability to be viewed from any location - including a smartphone. The included software will work for this application. 
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.