Please login or register.

Login with username, password and session length
Advanced search  

News:

The X10Hub (PiX10Hub) is here! Created by the Community, for the Community.:)% #:)

Author Topic: Need to physically open my XL  (Read 2482 times)

dberk

  • Jr. Member
  • **
  • Helpful Post Rating: 2
  • Posts: 16
Need to physically open my XL
« on: June 02, 2012, 12:27:37 PM »

 :( My USB jack on my XL is loose.

I am tempted to try to open the case and try to do something to "stabilize" the position of the USB jack.

Has anyone opened the case? Any tips? Will I be sorry?

Any experience?

Thanks,

dberk
Logged

hairface

  • Sr. Member
  • ****
  • Helpful Post Rating: 26
  • Posts: 108
Re: Need to physically open my XL
« Reply #1 on: June 02, 2012, 12:42:57 PM »

I wouldn't open it until u atleast talk to the X10 repair depot.

H
Logged
If I have helped you please click on "Helpful Post" under my name to the left. Thank you.

kenwolfe1

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Need to physically open my XL
« Reply #2 on: June 03, 2012, 03:54:40 PM »

Two screws on the edge between the connectors and jacks. Then use a plastic credit card to pry the white back off starting at the edge where the screws were. There are several molded clips that need to be released. Be careful as there is a speaker attached to the back that is wired to the io board (short wires).   Do it at your own risk. or seek a pro if you're the least bit unsure. Very fragile wires and connectors. It would be very easy to brick your tablet!!!!

Good luck and
Logged

cjhallx

  • Hero Member
  • *****
  • Helpful Post Rating: 12
  • Posts: 170
  • Over 35 years experience from PCs to mainframes
Re: Need to physically open my XL
« Reply #3 on: June 03, 2012, 04:56:22 PM »

:( My USB jack on my XL is loose.

I am tempted to try to open the case and try to do something to "stabilize" the position of the USB jack.

Has anyone opened the case? Any tips? Will I be sorry?

Any experience?

Thanks,

dberk


Is it still under warranty? 
Logged
I have an AIRPAD X which is a re-badge of the ZENITHINK ZT280-C91 and an AIRPAD XL which is a re-badge of the PLOYER MOMO15

If I have helped you please click on "Helpful Post" under my name to the left. Thank you.
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.