Topic: AirSight Outdoor Wireless - Wireless won't work (Read 3595 times)

sotiris · « **on:** May 10, 2012, 11:27:16 PM »

I'm doing what the manual states for the setup and it simply won't work - the wired works fine but obviously I need them work wirelessly. Is their a problem with these cameras?

X10 Repair Depot · « **Reply #1 on:** May 11, 2012, 08:01:00 AM »

Do a factory reset on the unit and set it up again. This will typically fix the wifi problem. If it does not, then you may have have a bad camera. Please contact customer service for an RMA.

zue · « **Reply #2 on:** October 07, 2012, 04:44:42 PM »

I too have a new Airsight PTZ (XX40a) that will not work wirelessly. I have follwed the setup instrcutions 20 times with no results. It seems to configure OK and when I unplug the wired conncetion the camera goes away and nerver comes back with a wireless connection. What is UP?

Carsonlu · « **Reply #3 on:** October 10, 2012, 10:34:05 PM »

Try unplug the power and plug again. sometimes, Camera get stuck, need to do it like this.

owossobob · « **Reply #4 on:** October 11, 2012, 08:58:12 AM »

Be sure to unplug the Ethernet cable right after telling it to connect wirelessly. See:
http://kbase.x10.com/wiki/IP_Camera_Wireless_Setup

News:

Author Topic: AirSight Outdoor Wireless - Wireless won't work (Read 3595 times)

sotiris

AirSight Outdoor Wireless - Wireless won't work

X10 Repair Depot

Re: AirSight Outdoor Wireless - Wireless won't work

zue

Re: AirSight Outdoor Wireless - Wireless won't work

Carsonlu

Re: AirSight Outdoor Wireless - Wireless won't work

owossobob

Re: AirSight Outdoor Wireless - Wireless won't work