Please login or register.

Login with username, password and session length

Author Topic: new router.modem  (Read 2483 times)

bikerg2001

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
new router.modem
« on: May 26, 2012, 02:14:39 PM »

just added new motorola router sbg6580 and im not seeing an address in the ipcamera tool....what needs to be done to connnect.....rebooted both cameras opened up port forwarding...all worked till new router was installed....thanks in advance for any help....
Logged

X10 Repair Depot

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 20
  • Posts: 311
  • I am here to help
Re: new router.modem
« Reply #1 on: May 26, 2012, 03:23:28 PM »

Depending on how you set up your camera and network, your camera is most likely no longer on the same subnet as your PC and / or router. Press and hold the reset button on the camera for 30 seconds until it resets, then set the camera up again from the beginning.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.