🔌General Home Automation > Automating Your House

EagleEye MS14A motion Sencer, not givihg an off code.

(1/1)

lgc:
unit (MS14A) will not send an off code weather I have it set up to detect motion at all times or only at when its dark. I have delay set for 2 blinks (2 minutes) Comes on OK when it sees motion. Just never shuts off. Just received this unit today. Is this a bad unit? Please help.

dave w:

--- Quote from: lgc on May 28, 2012, 01:50:58 AM ---unit (MS14A) will not send an off code weather I have it set up to detect motion at all times or only at when its dark. I have delay set for 2 blinks (2 minutes) Comes on OK when it sees motion. Just never shuts off. Just received this unit today. Is this a bad unit? Please help.


--- End quote ---
If you are positive the unit is not being retriggered, then yes it may be bad. Reset the motion delay to the default, take out the batteries for a few minutesand re-install. Then trigger it, and set it face down in a fluffy towel, or stick it undaer a shoe box. If it still doesn't send an OFF command then I would send it back.

Swingray:
unit (MS14A) will not send an off code weather I have it set up to detect motion at all times or only at when its dark. I have delay set for 2 blinks (2 minutes) Comes on OK when it sees motion. Just never shuts off. Just received this unit today. Is this a bad unit? Please help.

It seems that the unit will only work with the time delay if it is set to motion at all times. If it is set to D to D then when it gets dark it comes on and when it gets light it goes off the delay has no effect.

Navigation

[0] Message Index