Please login or register.

Login with username, password and session length
Advanced search  

News:

The X10 Community wants to know how you use your X10 system!
Share your story in the Automated Home Showcase.

Author Topic: EagleEye MS14A motion Sencer, not givihg an off code.  (Read 3162 times)

lgc

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
EagleEye MS14A motion Sencer, not givihg an off code.
« on: May 28, 2012, 01:50:58 AM »

unit (MS14A) will not send an off code weather I have it set up to detect motion at all times or only at when its dark. I have delay set for 2 blinks (2 minutes) Comes on OK when it sees motion. Just never shuts off. Just received this unit today. Is this a bad unit? Please help.
Logged

dave w

  • Expert Advisor
  • Hero Member
  • *
  • Helpful Post Rating: 131
  • Posts: 5590
Re: EagleEye MS14A motion Sencer, not givihg an off code.
« Reply #1 on: May 28, 2012, 07:49:53 PM »

unit (MS14A) will not send an off code weather I have it set up to detect motion at all times or only at when its dark. I have delay set for 2 blinks (2 minutes) Comes on OK when it sees motion. Just never shuts off. Just received this unit today. Is this a bad unit? Please help.

If you are positive the unit is not being retriggered, then yes it may be bad. Reset the motion delay to the default, take out the batteries for a few minutesand re-install. Then trigger it, and set it face down in a fluffy towel, or stick it undaer a shoe box. If it still doesn't send an OFF command then I would send it back.
Logged
"This aftershave makes me look fat"

Swingray

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: EagleEye MS14A motion Sencer, not givihg an off code.
« Reply #2 on: November 02, 2016, 05:26:39 PM »

unit (MS14A) will not send an off code weather I have it set up to detect motion at all times or only at when its dark. I have delay set for 2 blinks (2 minutes) Comes on OK when it sees motion. Just never shuts off. Just received this unit today. Is this a bad unit? Please help.

It seems that the unit will only work with the time delay if it is set to motion at all times. If it is set to D to D then when it gets dark it comes on and when it gets light it goes off the delay has no effect.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.