Contact | X10.com
Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: XX36A loses wireless connection at sundown, reconnects in a.m.  (Read 2268 times)

l3v3l1

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
XX36A loses wireless connection at sundown, reconnects in a.m.
« on: June 07, 2012, 09:08:42 PM »
Every night the camera loses its wireless connection and is fine in the morning.
any ideas?
thanks Jason
Logged

X10 Repair Depot

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 20
  • Posts: 311
  • I am here to help
Re: XX36A loses wireless connection at sundown, reconnects in a.m.
« Reply #1 on: June 08, 2012, 06:35:58 AM »
That's an odd one. If this happens every day, I doubt that it is a bad camera. It is most likely a configuration problem.

Can other devices connect to your router at night? Perhaps the router is configured to only allow the camera (or all devices) to connect during certain times. There are some time settings in the camera setup relating to motion detection.
Logged

l3v3l1

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: XX36A loses wireless connection at sundown, reconnects in a.m.
« Reply #2 on: June 08, 2012, 02:11:15 PM »
the router is fine with other items at night, i viewed the camera last night. At sundown it began to flash between night vision and regular vision a few times,then lost connection
jason
Logged

Film35HD

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Re: XX36A loses wireless connection at sundown, reconnects in a.m.
« Reply #3 on: June 09, 2012, 02:19:29 PM »
Quote from: l3v3l1 on June 08, 2012, 02:11:15 PM
the router is fine with other items at night, i viewed the camera last night. At sundown it began to flash between night vision and regular vision a few times,then lost connection
jason

I feel better knowing I'm not the only one with that issue...

See my earlier post about the same issue.  Only a software reboot (on the System menu tab) would solve the auto-iris going from vast light changes.  The 60Hz/Outdoor reset will work for sunrise, but not for sunset.

I have sent 2 cameras back during a problem with the firmware update.  My 3rd camera just arrived today and I'll report back.

Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.