Please login or register.

Login with username, password and session length

Author Topic: Nstinct Remote works great!!!!!!!!!!  (Read 18873 times)

danrose111

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Nstinct Remote works great!!!!!!!!!!
« on: February 04, 2011, 01:43:30 PM »

Hi,
Just joined this Forum to post my experience and review of the Nstinct remote that I just finished
setting up. Bottom Line =  :)%. Took about one hour and everything is working wonderfully.
Here is my setup:

TV = Mitsubishi - WD-65C10
Satellite - DirecTV
BlueRay - Samsung BD-C6500
Audio - external - Sony HT-CT150

Because my TV does not have an HDMI ARC and only a single Digital Audio Coax output I had to connect
the BlueRay and DirecTV  to the TV via HDMI. The Sony Ht-CT150 is connected to the TV via Digital
Audio Coax. Here is the outcome of my Nstinct setup:

TV - pointed the Nstinct and the code was found immediately. After checking all the current TV remote's buttons
on the Nstinct remote the only buttons that I had to use the Learn function for TV mode was input (put on main key of same name), freeze and format which I put under side keys.

BlueRay - pointed the Nstinct and everything configured fine except for Pause button. I then just did the Learn for pause on main key.

DirecTV - pointed the Nstinct and everything configured fine except for a couple of Guide menu buttons (12 hours forward, 12 hours back, Guide options) These are so unimportant but being the nut that I am configured them under Learn and side keys.

Sony Ht-CT150 - pointed the Nstinct and 95 percent was auto configured. I had to Learn the Soundfield and up/down/left/right/OK buttons which I put under main keys.

So to conclude I am very happy with the Nstinct and would recommend to anyone I know.

Enjoy the Superbowl !!!!!!!!!!!!
Logged

sazzam

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 28
Re: Nstinct Remote works great!!!!!!!!!!
« Reply #1 on: December 07, 2011, 03:10:16 PM »

I have a DirectTv HD receiver. I am having trouble with channels that are more than one digit.

Example: Channel 7 works immediately.
Channel 295 you have to keep the remote pointing to the receiver because the Nstinct pauses between each digit.

Do you have the same problem?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.