Please login or register.

Login with username, password and session length

Author Topic: Best controller for DIY on Mac OS X?  (Read 22005 times)

vvvjv

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Best controller for DIY on Mac OS X?
« on: August 30, 2012, 08:57:36 PM »

I'm an experienced programmer, but I have no home automation experience.

I would like to send/receive X10 commands from my Mac.  (I'm also open to protocols other than X10.)  I'm looking for recommendations for bridging the gap between my USB port and the wall socket.  In other words, I'm looking for a controller that will work well with my Mac and allow me to issue basic X10 commands via a command line interface or HTTP.  Something that worked with a perl module such as MisterHouse (http://misterhouse.sourceforge.net/) would also be fine.

I'm not interested in graphical interfaces for controlling X10 stuff.  I want to write my own programs.

[Added later:] The sort of thing I'm looking for is a CM11a or LynX-PLC, but both of these seem to be discontinued.
« Last Edit: August 31, 2012, 08:30:20 AM by vvvjv »
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Best controller for DIY on Mac OS X?
« Reply #1 on: August 31, 2012, 07:37:31 AM »

What's a MAC?

Will be hard finding a match for your restrictive criteria. In another life I used "Xtensions" from SHED Engineering. http://www.shed.com/
Logged
"This aftershave makes me look fat"

vvvjv

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Best controller for DIY on Mac OS X?
« Reply #2 on: August 31, 2012, 08:25:22 AM »

I assume you're joking about not understanding what a "Mac" is, but in case not: Mac = Apple computer running Mac OS X, a non-Linux version of Unix.  (Just as GNU stands for "GNU's Not Unix", MAC stands for "MAC's A-not Linux", except that you misspell Linux with a "C".)

The Xtensions/SHED web page was helpful -- thanks.  Just to clarify, I'm looking for a hardware recommendation, not a software recommendation.  I'll edit my original question to make that clearer.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Best controller for DIY on Mac OS X?
« Reply #3 on: August 31, 2012, 08:54:55 AM »

I assume you're joking about not understanding what a "Mac" is, but in case not: Mac = Apple computer running Mac OS X, a non-Linux version of Unix.  (Just as GNU stands for "GNU's Not Unix", MAC stands for "MAC's A-not Linux", except that you misspell Linux with a "C".)

The Xtensions/SHED web page was helpful -- thanks.  Just to clarify, I'm looking for a hardware recommendation, not a software recommendation.  I'll edit my original question to make that clearer.

Yeah, I was joking.  if I used "Xtensions" I would know what a MAC is. Anywho, Xtension will interface to many different X10 computer to PLC interfaces (CM15A, CM11A, TI103, Ocelot, 1132U etc.)

If you Google "MAC to X10 interface" you will probably get more information than what this forum may pop up. Likely any USB based X10 interface can be made to work if you intend on writing your own software. Probably the Smarthome.com 2414U is a good choice. X10 is no longer making the CM15A but they might be available on Ebay.
« Last Edit: August 31, 2012, 09:01:55 AM by dave w »
Logged
"This aftershave makes me look fat"

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2285
    • XTB Home Page
Re: Best controller for DIY on Mac OS X?
« Reply #4 on: August 31, 2012, 09:31:36 AM »

Some folks are using the XTB-232 with XTension, and one at least one fellow is using it with HeyU. 

Jeff
Logged
X-10 automation since the BSR days

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Best controller for DIY on Mac OS X?
« Reply #5 on: August 31, 2012, 09:59:08 AM »

Apolgies Jeff! I forgot about the XTB-232, which is undoubtedly superior to the lot I mentioned.
Logged
"This aftershave makes me look fat"

vvvjv

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Best controller for DIY on Mac OS X?
« Reply #6 on: August 31, 2012, 12:31:18 PM »

Thanks again for the useful replies.

I'm considering the following set-up.  If this seems unwise in any way to you, please let me know.

1. MisterHouse (http://misterhouse.sourceforge.net/ and/or http://misterhouse.wikispaces.com/) works with a wide variety of (old) interfaces, is free, and is written in perl (which I prefer).  It has not been updated since 2008, so for best results I think I need an old, discontinued controller or...

2. The XTB-232 (http://jvde.us/xtb/XTB-232_description.htm) emulates a CM11a (and MisterHouse works with a CM11a).

3. A USB-serial adapter.

4. MacOSX-specific tweaks to MisterHouse as described at http://onlamp.com/onlamp/2004/11/11/smrthome_hks1.html .

Logged

deepakkamesh

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Best controller for DIY on Mac OS X?
« Reply #7 on: January 30, 2016, 09:13:12 PM »

I wrote something in golang for cm11 if you are interested (https://github.com/deepakkamesh/cm11)
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.