Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: Macro 101 question  (Read 5424 times)

Gismo

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 47
Macro 101 question
« on: September 08, 2012, 05:55:47 PM »

I have AHP 3.318 Win 7, with a cm15a and a TM751.  I never used macros before.  I have a PLW01 that is controlled by AHP by time to turn on and off say 7pm to 11 pm.  I have a few MS16A detectors and 2 TM751's.

What I would like to do is place the detector outside and have it turn on my assigned PLW01 when someone comes to my door.  But I would only want it to trigger during a window of time other than the programmed time. Say 11pm to 2am.  Can I do this totally thru AHP with out dealing with re-programming the detector .I know the detector is default at A1, and would be great to leave it at that since i know i will have to replace batteries.

Lets say I have PLW01 is set at C5. I have no idea where to go from here. 
Any help would be much appreciated, I'm sure once I get the basic hang of it I will be able to add on more macros for other devices.
Logged

Gismo

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 47
Re: Macro 101 question
« Reply #1 on: September 09, 2012, 11:58:24 PM »

After reading alot and I mean alot of postings on this forums I got the basics down, was not as bad as I thought to get started.  Thanks to all that posted great info.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.