Please login or register.

Login with username, password and session length

Author Topic: CM11A dawn/dusk setting with latest AHP 3.318 under Window 10  (Read 1536 times)

VictorCW

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
CM11A dawn/dusk setting with latest AHP 3.318 under Window 10
« on: December 15, 2017, 03:04:40 PM »

Does anyone have success  with latest 3.318 running CM11A with the dawn/dusk setting in their macro ?
I was able to update CM11A with the Hardware Configuration Table (the one that shows the time, location, and time table for dawn/dusk.  However,  the macro does not start according to the time as specified for dusk as  in the "table".

If you have successful story  with it, do you just use "dusk" or "dawn" for On and Off    or you also use the "dawn/dusk"  with Before/after setting ?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.