Please login or register.

Login with username, password and session length

Author Topic: Airsight xx40A  (Read 2924 times)

richy2

  • Hero Member
  • *****
  • Helpful Post Rating: 6
  • Posts: 303
Airsight xx40A
« on: November 22, 2012, 09:20:26 AM »

Am i missing something or is it defective? I just receive my Cert. Like New AirSight xx40a and it was a breeze to set up but in the cams software how do you zoom. Yes i took out the foam protection inside the dome.

I press the center  on the PAN TILT controller but nothing happens.. The PAN TILT works just fine.

Logged

dinosinc

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 37
    • My Beer Kegerator
Re: Airsight xx40A
« Reply #1 on: November 22, 2012, 10:19:46 AM »

Might be defective, I got a re cert cam and it would not focus properly had to send it back for a replacement
Logged

richy2

  • Hero Member
  • *****
  • Helpful Post Rating: 6
  • Posts: 303
Re: Airsight xx40A
« Reply #2 on: November 22, 2012, 01:44:25 PM »

UPDATE TO MY OP.

After going thru the manual line by line i found the zoom control from the diagram figure 4.1.

Note i was using firefox and FYI some items may not be available in firefox browser.. its best to use I.E.

DON'T BE LIKE ME..USE I.E.

BEST ADVICE.. READ THE MANUAL AND SET UP.. STEP BY STEP BY STEP EVEN IF YOU DONE IT BEFORE.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Airsight xx40A
« Reply #3 on: November 23, 2012, 10:00:32 AM »


BEST ADVICE.. READ THE MANUAL AND SET UP.. STEP BY STEP BY STEP EVEN IF YOU DONE IT BEFORE.

Excellent advice, unfortunately most folks just click the mouse, then ask for someone on the forum to read the instructions for them.
Logged
"This aftershave makes me look fat"
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.