Please login or register.

Login with username, password and session length
Advanced search  

News:

The X10Hub (PiX10Hub) is here! Created by the Community, for the Community.:)% #:)

Author Topic: Wired camera mounts  (Read 5811 times)

cccol

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Wired camera mounts
« on: January 08, 2013, 03:05:04 PM »

I have an Anaconda camera that the mount arm and base broke off of.  Any one know where to get replacements or have engineered something to work?
Logged

Noam

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 49
  • Posts: 2799
Re: Wired camera mounts
« Reply #1 on: January 08, 2013, 03:53:46 PM »

Have you tried to epoxy the plastic back together?
Depending on where it broke, you may be able to attach a standard "L-bracket" (the kind you'd buy at the hardware store) to the back, and go from there. (You might want to remove the back of the camera first before you drill holes in it, so you don't drill through anything important).
Logged

cccol

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Wired camera mounts
« Reply #2 on: January 08, 2013, 04:24:10 PM »

Thanks, Noam.  The "L" bracket may work.  I don't have the base and half of the arm anymore.  Screws were rusted and when I tried to readjust the arm it snapped in two.  The arm mount on the back of the camera is still intact (if I don't break it getting the other piece of the arm  off!).
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.