Please login or register.

Login with username, password and session length

Author Topic: XX40a Antenna  (Read 1788 times)

hjr007

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 22
XX40a Antenna
« on: July 02, 2013, 07:17:55 PM »

Received my new airsight XC40a..

Hardwired install no issues but wireless is a different
The external antenna will  not screw into the camera.  The antenna male is too big.  it just slides into the female on the bracket

X10 is sending me a new antenna.

Anyone else seen this issue

In the meantime to tried the antenna from my old pan and tilt.  IT SCREWED IN OK and did work wireless as long as I stayed in the room with the router.

Once I tried it someplace it would not work.

Looked closely at the 2 antennas

the one from the xc40a (long antenna has a wire coming out the middle of the cable).

the one from my old pan and tilts does not.

Anyone else tried anything else. :(

Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.