Please login or register.

Login with username, password and session length

Author Topic: CM19A not transmitting???  (Read 8904 times)

liderbug

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 52
CM19A not transmitting???
« on: February 16, 2015, 11:04:51 PM »

Raspberry Pi running mochad with a CM19A.

When I
  echo "rf e3 on" | nc 127.0.0.1 1099

mochad echos time Tx RF HouseUnit: E3 Func: On
but e3 does not turn on.  The TM751 is about 20' away and I have a CM11A plugged in also and it doesn't see the CM19A outgoing command. 

Anybody???
Thanks
cal

Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13256
Re: CM19A not transmitting???
« Reply #1 on: February 17, 2015, 07:47:05 AM »

The TM751 is set to House Code E?
You may want to rotate the House Code Dial on the TM751 a few times. On the chance it is dirty and it is on a different House Code.

If your TM751 has the controlled outlet on it {there was a production run with a hard wired pass through outlet}. If you send an E1 On and an E1 Off. Can you control the TM751s output?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.