Please login or register.

Login with username, password and session length

Author Topic: KR19A Will not go into program mode.  (Read 2308 times)

bluesman60

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
KR19A Will not go into program mode.
« on: April 18, 2015, 03:55:25 PM »

Hello, I'm new to this forum. I got this on ebay (1st mistake) I just rented this place, and found a s467 controlling out door entrance lights. Landlord said your on your own. I also picked up an m751. I just don't want my girl to come home to a dark entryway. So, the system works fine in the default setting, but others close by already use it, and when I try to enter program mode to change it the led blinks, goes dark, and never stays steady red! Yes I'm pressing the first set on-off ....  ;D Before I return this to eBay, does anyone have any ideas? is there a factory reset? I searched the web and found nothing.   Btw.. both eBay devices are previously used.

Much Appreciated!

Thanks.....
Logged

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2285
    • XTB Home Page
Re: KR19A Will not go into program mode.
« Reply #1 on: April 18, 2015, 04:16:55 PM »

If previously used, have you verified that the battery is still OK?

Jeff
Logged
X-10 automation since the BSR days

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: KR19A Will not go into program mode.
« Reply #2 on: April 18, 2015, 05:07:28 PM »

Are you sure your using the correct programing method?
Programing depends on the date built see: http://forums.x10.com/index.php?topic=10654.0
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.