Please login or register.

Login with username, password and session length

Author Topic: Airsight XC36A camera setup  (Read 6467 times)

tomh

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 56
Airsight XC36A camera setup
« on: January 29, 2017, 09:29:57 PM »

So, I've had this camera for a few years and I want to make it work again.  I had it running on another computer, cut can't seem to find the program to make it run anymore.  I can't find the original disk that came with it.  I already have the IP address which was from the IP Camera Tool.  It was on an old computer with Vista and 32 bit.  I would like to get it up and running on a Win 7 or 10 machine 64 bit.  What can I do next?

Thanks  :(
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Airsight XC36A camera setup
« Reply #1 on: January 30, 2017, 02:42:19 AM »

if you have the IP from the camera tool used on that pc then you just go to the browser and log in using the IP and port.
if you've lost the camera tool try this one http://www.authinx.com/x10/Cameras/software/IPTool.rar
I have a copy of the windows software some where I see if I can find it.
here are some links not sure what will work
http://tuicemen.com/downloads/Airsight_IPCamClient_1.9.0.22.exe
http://tuicemen.com/downloads/LiveSuit_W7_64BIT.zip
« Last Edit: January 30, 2017, 02:54:18 AM by Tuicemen »
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.