Please login or register.

Login with username, password and session length
Advanced search  


The X10 Community wants to know how you use your X10 system!
Share your story in the Automated Home Showcase.

Author Topic: Alarm system module  (Read 1266 times)


  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 59
Alarm system module
« on: April 26, 2017, 12:56:09 AM »

That might be similar, it has a dialer. The 521 does not.
That unit has the very same motion detector that the 521 doesn't seem to recognize.

The 521 recognized and installed all the door sensors and keypads/keyfobs the magnavox thing used.
But I haven't had success with the PIR yet.
It's not walk testing at the moment, so it might be just from age.

I had to scrap out a brand new door sensor, it installed but then a few hours later got flaky.

Brian H

  • Community Organizer
  • Hero Member
  • **
  • Helpful Post Rating: 282
  • Posts: 12126
Re: Alarm system module
« Reply #1 on: April 26, 2017, 06:12:10 AM »

Where the three manuals I scanned and attached in this thread any help?

From your other threads. Are you trying to use a MS10A Motion Sensor?
Did you initialize it as pointed out in the other threads. Before trying to enroll it?  If not initialized first. It will not be properly added.
« Last Edit: April 26, 2017, 06:22:14 AM by Brian H »
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.