Please login or register.

Login with username, password and session length

Author Topic: History Function Observation  (Read 1584 times)

martin

  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 125
History Function Observation
« on: February 02, 2018, 06:09:49 AM »

Folks, I’ve played with the history function of my WM100 WiFi hub and noted the following:

Device needs to be created first before the history function can report status / action. In other words, if you send a X10 command that does not have an associated device created in the WiFi hub, the history function will not report it.

Once the device is created, the History function will track the associated PLC command regardless of the source (i.e. Palmpad, AHP or Console).

History report is not updated in real time (unlike AHP), you have to synchronize with the WM100 each time (selecting “Back” and then “X10 WiFi history and settings” to get the refreshed data).

History function is accessed under “Setup” and then by selecting “X10 WiFi history and settings”. Not sure why the label says “and settings” as I did not see any History function associated settings.

Martin
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: History Function Observation
« Reply #1 on: February 02, 2018, 07:45:42 AM »

The "and settings" refers to the app version, IP and Port info that is displayed.
I believe "History and app Info" would have been more suitable.

It is true the history only reports PLC activity of devices configured.

Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.