💬General Category > Mac/Linux & Open Source and the X10 Home
Where to get answers about 'Heyu'
npaisnel:
Looking at other posts with 'heyu' questions it seems that heyu knowledge here is a bit thin on the ground,
Does anyone maybe have any hints on other places (forums) where there may be a greater knowledge base on heyu. The man pages and sample x10 sched and conf files are only providing limited info
Thanks
petera:
You could try the GitHub. You can address your issues directly towards the developer and there is a decent outline of Heyu and it's workings https://github.com/HeyuX10Automation/heyu
npaisnel:
--- Quote from: petera on July 30, 2018, 02:35:04 PM ---You could try the GitHub. You can address your issues directly towards the developer and there is a decent outline of Heyu and it's workings https://github.com/HeyuX10Automation/heyu
--- End quote ---
thanks I'll try there , though it seems a bit 'dead' posts going back and it seems 3 years ago is the most modern
petera:
--- Quote from: npaisnel on July 30, 2018, 03:40:46 PM ---
--- Quote from: petera on July 30, 2018, 02:35:04 PM ---You could try the GitHub. You can address your issues directly towards the developer and there is a decent outline of Heyu and it's workings https://github.com/HeyuX10Automation/heyu
--- End quote ---
thanks I'll try there , though it seems a bit 'dead' posts going back and it seems 3 years ago is the most modern
--- End quote ---
Heyu has come on leaps and bounds over the last number of years. 2.10 as far as I remember. The important thing to remember here is that the X10 user base is not as big as it used to be but that version is quite up to date. The posts you refer to as being 3 or more years old are just issues raised at time of release of a particular version and Heyu 2.10 is quite stable.
Best you road test it as much as possible and if you do hit any snags report it to the developer at GitHub so he/she can address them directly for you. Most of the documentation on the GitHub covers most of the questions you will probably have.
The install instructions I posted earlier for installing Heyu on the Raspberry Pi includes the latest version.
npaisnel:
I have been using heyu v2.11-rc3 and HA-bridge for a few months now, for direct control via Alexa, and that worked fine,
Just wanting to upload macros with delays to the CM11 , but as I cant figure it out and you guys seem to thing that HA or HG are better at uploading stuff to the CM11, then I'll struggle on to get HA working
Navigation
[0] Message Index
[#] Next page
Go to full version